-40%
EMAX Tinyhawk II Indoor FPV Racing Drone RTF w/Jumper T Lite with JP4IN1 Module
$ 114.03
- Description
- Size Guide
Description
EMAX Tinyhawk II RTF is fully assembled and tuned, ready to fly. The EMAX Tinyhaw II RTF comes with RunCam RunCam Nano 2 FPV Camera,37CH 25/100/200mW higher power VTX and LED and F4 flight controller and 5A ESC,16000KV more powerful motors and Jumper T-Lite OpenTX Hall Sensor Gimbals Remote Controller with JP4IN1 Multi-Protocol Module . The Tinyhawk 2 RTF drone is the perfect micro quad for both indoors and out.On SWB Potion, we set "Lock" "Attitude Mode" and "Acro Mode" there as below:
When you receive the drone, plug the battery, Turn on the radio, bind with the drone unlock the drone, you can fly it.
Frame
Wheelbase: 75mm
Dry Weight: 31.2g
All Up Weight: 43.5g with 1x 450mAh 1S battery
Frame Material: Polypropylene
Motors
Stator Size: 0802
Kv: 16000kv
Propeller Mount: Push-On Avan TH-style
Propeller: Avan Turtlemode 4-Blade
All-In-One (AIO) Flight Controller
Flight Controller: F4 (MATEKF411RX Firmware)
ESC: 4-in-1 5A BlHeli_S
Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode)
Battery Connector: JST-PH2.0
FPV System
VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)
Channels: 37CH incl. Raceband
Camera: RunCam Nano 2 1/3" 700TVL CMOS
Smart Audio Connected
Jumper T-Lite Radio:
Item Brand: Jumper
Item Model: T-Lite
Channel: 16CH
Gimbal:Hall Sensor
Screen:1.3 " LCD screen
Size: 166*106*56mm
Weight: 260g (with18650)
Voltage: DC3.5-4.2V
Battery: 1x18650( Battery not included )
External MicroSD Card: reserved SD cards lot
Module Chip: 4IN1 Module
A7105-Flysky,Hubsan,AFHDS2A etc
CC2500-Frsky,Futaba SFHSS,Hitec,Radiolink,Esky,Corona etc
CYRF6936-DSM / DSMX,Walkera Devo,Wfly etc
NRF24L01-HISKY,Syma,ASSAN etc
Package Includes
1x Tinyhawk II Drone BNF
2x CCW + 2x CW Spare Props
1x 1S-2S USB LiPo Charger
1x Screwdriver + Hardware Kit
1x EMAX 450mAh 1S HV Battery
1x EMAX 300mAh 2S HV Battery
1x Jumper T lite radio with JP4IN1 Module
On Jun-28-21 at 19:46:06 PDT, seller added the following information: